Painting and painting device - paint zoom spray gun

Painting and painting device - paint zoom spray gun

Spray gun for painting surfaces with a single application of paint, varnish or emulsion.

It allows you to reach hard-to-reach places where the roller or brush does not reach.

It allows even coverage of different types of surfaces. Covering 10 - 15 m2 / 10 minutes.

• efficient compressor with 650W motor
• adjustable nozzle: vertical, horizontal, diagonal
• 1,5 m long tube
• carrying strap for easy carrying on the shoulder
• plug for measuring the viscosity of liquids
• gun with adjustable fluid flow
• an 800 ml paint container with a measuring tape showing how much remaining paint is left
• Supply voltage: 230V
• Maximum power: 650W
• Spraying power: 105W
• Coverage: 10 - 15 m2 / 10 minutes
• Viscosity: maximum 130 DIN-sec
• Working Pressure: 3 – 4 PSI

The maximum time (approx. 15-20 minutes) of continuous coloring must not be exceeded. This can cause the motor to overheat and damage the unit.

Weight	3 kg
Dimensions	40x30x30 cm

Instructions for use

Instructions for use of the product:

1. Preparing the device: Before using the Paint Zoom device, it is necessary to prepare it. First, you need to fill the paint container with the color you want to use. Then it is necessary to assemble the device and connect it to the power source.
2. Surface preparation: Before you start spraying paint, you need to prepare the surface you want to paint. The surface must be clean, dry and free of dust or other impurities.
3. Spraying paint: Once the device is ready and the surface is ready, you can start spraying paint. Hold the device approximately 20-30 cm from the surface and press the spray button. Move the device over the surface to apply the paint evenly. Be careful not to spray too close to the surface, as this may cause the paint to drip or spill.
4. Cleaning the device: The device must be cleaned after use. First, empty the rest of the paint from the container. Then disassemble the device and clean the paint container, paint tube and spray nozzle. This can be done with water or another suitable cleaner.

Tips for work

Useful tips for work:

1. Choose the right color: Before you start spray painting, choose the right color for your project. Make sure the paint is suitable for the surface you want to paint and that it is suitable for use with the Paint Zoom paint spray system.
2. Protect the surroundings: Before you start spraying paint, protect the surroundings. Cover floors, furniture, and other items that may be exposed to paint. This will prevent paint from getting onto unwanted surfaces.
3. Adjust the spray speed: The Paint Zoom paint spray system has a 3-stage spray system that allows you to adjust the spray speed. Start with a slower speed and gradually increase it until you reach the desired spray speed.
4. Move the device evenly: When spraying paint, keep the movement of the device steady and not too fast. The movement should be slow and steady so that the paint is evenly applied to the surface.
5. Clean the device after use: It is important to clean the device after use. This will prevent the paint from drying on the device and damaging it. Clean the device immediately after use and store it in a dry place.

The received invoice is valid as a 12-month warranty exclusively for electronic products. Always save the invoice you receive *Guarantee for airless devices only on e. motor with proper cleaning of the device *24 months for HUEPAR products *36 months for Sas+all PRO products *For detailed instructions on how to claim warranty or service, write to us.